Difference between revisions of "FR Tutorial"

From Tučňák Wiki
Jump to: navigation, search
(a)
(Exemple d'utilisation du logiciel de contast VHF/UHF/SHF Tucnak)
Line 1: Line 1:
== Exemple d'utilisation du logiciel de contast VHF/UHF/SHF Tucnak ==
+
== Exemple d'utilisation du logiciel de contest VHF/UHF/SHF Tucnak ==
  
 
(TRADUCTION EN COURS ET DONC NON TERMINÉE)
 
(TRADUCTION EN COURS ET DONC NON TERMINÉE)

Revision as of 20:12, 31 July 2008

Exemple d'utilisation du logiciel de contest VHF/UHF/SHF Tucnak

(TRADUCTION EN COURS ET DONC NON TERMINÉE)

(note: testé avec Tucnak 2.12 avec X window sur distribution OpenSuse 10.2).

Démarrage :

Démarrez Tucnak. Si vous démarrez Tucnak pour la première fois, une fenêtre apparaîtra. Remplissez les champs par défaut, par exemple :

Callsign: TM0LX
Club: Radio-club Linux
Operator: F0FLO
Your WWL: JN25HH
PAdr1: 20 rue de Paris
PAdr2: 75000 PARIS
Your EXC:
RS: 59
RST: 599

Pressez OK.

Pressez <F10>. Un menu apparaît. Utilisez les flèches et la touche <Entrée> pour vous déplacer. Sélectionnez

Contest > New from wizard <Entrée>
IARU Region I. VHF Contest <Entrée>

Une nouvelle fenêtre apparaît. Vérifiez que les informations soient correctes et appuyez sur OK.

Sélectionnez la bande 144 MHz :

<F10> band <Entrée> c

Pressez

ALT+O

pour changer l'opérateur (attention, c'est ALT-Oscar, pas ALT-Zero). Entrez votre indicatif.

Là, vous êtes prêt.


Le logging de base
Pour logguer un QSO : votre curseur est maintenant dans la ligne de saisie près du bas de la fenêtre principale.

Saisissez l'indicatif et les informations, pressez <Entrée>, vérification du doublon puis appuyez sur <Entrée> si tout est correct. Par exemple :

9A4VM <Entrée>, 59003 JN85FS <Entrée> vérifiez l'exactitude, <Entrée>

Rajoutons d'autres contacts dans le log :

G2XV/P 59010 JO02CE <Entrée> vérification <Entrée>
EA2BFM/P 59003 IN83FE <Entrée> vérification <Entrée>


Bloc-note : is Tucnak n'est pas sûr d'une des données saisies, il l'écrira au-dessous du champ de temps. Voyez le champ de saisie comme un bloc-note. Par exemple, un locator incomplet sera affiché là. Essayez :

G0VHF/P 59007 JO01 <Entrée>

Complétez le QSO avec

JO01PU <Entrée> vérification <Entrée>


L'ordre dans lequel sont saisies les données n'a pas d'importance. Par exemple, ceci marchera également :

IO91RU 59020 G3VER/P <Entrée> vérification <Entrée>


Vous pouvez saisir un report différent de 59. Ajoutez juste le report correcte. Par exemple, pour envoyer un report de 53 :

M8C 53 59002 IO91JH <Entrée> vérification <Entrée>

Bien sûr, vous pouvez changer le report pendant que vous vérifiez que tout est correctement saisi :

PE1EWR 59041 JO11SL <Entrée> 53 <Entrée> vérification <Entrée>


Si vous détectez une erreur, effectuez une correction avant le <Entrée> final. Par exemple :

M0GPZ/P 59010 IO74VT <Entrée>

Imaginons que l'indicatif soit faux, c'est une station écossaise et le préfixe devrait être MM0. Saisissez

MM0GPZ/P <Entrée> now everything is correct <Entrée>


Tucnak keeps the information you have entered, just in case. Imagine a really difficult QSO. First you type:

G8AHK/P 59037 IO80QT <Entrée>

But you are not sure if G8AHK is portable or not. You change the callsign:

G8AHK <Entrée>

Then you hear that G8AHK is portable. So you toggle between the two callsigns

ALT-C

See, G8AHK/P in the upper line. But now you are not sure about the locator and enter:

IO80TQ <enter>

In the following over, G8AHK/P confirms that yes, they are portable, and confirm the locator is India Oscar Eight Zero Quebec Tango, and not Tango Quebec. So you type

ALT-V

to toggle the locator. Now everything is correct and you log the QSO with

<enter>


If the station gives an optional exchange, for example a post code, you must add a period “.” For example, if M3CAX/P sends “CB” as postcode, you write “CB.”

M3CAX 59002 CB. JO02CE <enter> check <enter>


A remark must start with a hash “#”. Only one word is allowed, so you may need to link words with a hyphen “-”. Example: G4DEZ tells you that you have “a nice signal”. Good news, your power amplifier is still working :-)

G4DEZ 59102 JO03AE #NICE-SIGNAL <enter> check <enter>


To edit an entry in the log, go there with the arrow keys and press enter. A window will appear. Edit and press OK. Go back to the input line with <ESC>.

<F3> clears the input line and any information that has not been saved. Try:

G3NFC/P 59002 <enter> IO82ET <F3>

ALT+Y has the same function. If you just want to clear the input line, use CTRL+Y.

Now lets switch to another band. Suppose you now operate on 433 MHz. ALT-B is a shortcut to change bands. So type:

ALT+B e (to select 433 MHz)

Now type:

G2XV/P <enter>

Tucnak remembers that you have worked G2XV/P already on 144 MHz. So the software offers the locator JO02CE. Add the report and serial number:

59030 <enter>

and press Alt-X to accept the locator. Press <enter> to write to the log. Useful, isn't it?

What do you do if something goes wrong? For example, if one QSO goes wrong and you need to increase the QSO-number you must add an ERROR:

<F10> Edit => Add ERROR.


Note that the input line has a memory. With ALT+P and ALT+N, you can recall the last text you have entered there. ALT+H shows the history. Select a line with the arrow keys and/or <enter>. Or press <ESC> to go back to the input line.


Windows
Switch to another window. For example, see how you are doing in the statistics window (Stat) by pressing

<F4>

several times. Remember that you can change to another band with ALT+B. If you followed this tutorial, you should have a few contacts in the 144 MHz entry. So have a look at the 144 MHz statistics by pressing

ALT+B c


You can also directly open the windows by pressing ALT and the number of the window. ALT+1 will bring you back to the QSO window. Or press

ALT+0

to open the Map window (this is ALT-Zero). Here, all QSOs of the band are displayed. Use the mouse to select one of the contacts. The information is displayed on the right. Zoom in using CTRL++ (CTRL and plus) or CTRL+= (CTRL and =). Zoom out using CTRL+- (CTRL and minus). You can also use the mouse wheel to zoom in or out. Drag the mouse around with the arrow keys (or use the mouse with the left mouse button pressed).

More information here: