Davac4

From Tučňák Wiki
Revision as of 08:29, 31 August 2022 by Ok1zia (talk | contribs) (Program the FT232R)
Jump to: navigation, search

Davac 4.2 OK1ZIA

Davac 4.2 is updated version of Davac 4.1.

News

  • Most possible parts are SMD, except too expensive or unobtainable ones
  • Designed for SMD reflow

Circuit diagram

File:Davac4.2.png
Circuit diagram of Davac 4.2

PCB

Davac4.2-jlcpcb.zip Gerber files to order PCB at jlcpcb.com.

TODO


Parts

Transformer TR-1/1 www.tme.eu

Jack 6.35 K3606D www.gme.cz or K36092B

White connectors for cable pins

Black connectors for cable flat cable

Program the FT232R

As default, the FT232R acts as serial port. But Tucnak uses Libftdi to access it in bitbang mode. Default VID:PID must be changed to distinguish Davac from other USB serial ports.

Linux

Use original ft232r_prog or modified ft_prog, contains statically linked x86_64 binary.

Usage:

# ft232r_prog --new-vid 0xa600 --new-pid 0xe110 --manufacturer OK1ZIA --product 'Davac 4.2'
...
Rewriting eeprom with new contents.

Now replug the device

# lsusb
...
Bus 002 Device 007: ID a600:e110 Asix OK1ZIA Davac 4.x
#

(texts are not same, they origins from lsusb database)

In the case of mistake, use --old-vid and --old-pid. AFAIK this can be used also to fix fake FT232 bricked by Windows FTDI drivers.

Windows

MProg with loaded Davac4.ept

Under Windows, use MProg. Download File:Davac4.ept and open it in MProg. Note on Windows XP you need D2XX drivers; on newer versions they are installed automatically.

Unplug all other FTDI devices and press the Program All Existing Devices button.

Install USB drivers

Linux

You have nothing to do, It will work automatically. Only on specific distributions you may have to set permissions to USB device, which is normally done by udev script.

Windows

Zadig with Davac4

Under Windows 7 or newer, use Zadig. On XP use 2.2.

Click Options, List All Devices.

Choose WinUSB and press Install Driver.